架空地板又叫做耗散型靜電地板,是用支架、橫梁、面板組裝而成的一種地板,地面和地板之間就有一定的懸空空間,可以用來走線及送風等,當架空地板接地或連接到任何較低電位點時,使電荷能夠耗散,電阻在105——109Ω為特征,在計算機機房、數據機房等線路眾多的機房是相當實用的.那么它都有哪些種類的呢?很多人都不是特別了解架空地板,它該如何安裝呢?山東塑膠地板的小編就來為大家介紹下架空地板的具體安裝流程.

The floor is also called dissipative static floor, a floor frame, beam, panel assembly, there is a vacant space between the floor and the floor, can be used to walk the line and air, when the overhead floor grounding or connection to any lower potential point, the charge can be dissipated in 105 - 109, the resistance characteristics in the computer room, data rooms in many lines of the room is very practical. It is what kind of? Many people are not particularly elevated floors, how to install it? Shandong plastic floor of small series to introduce the specific installation process under the floor.

架空地板種類

Type of overhead flooring

1、合金鋼架空地板

1, alloy steel overhead floor

合金鋼架空地板改進以往的工藝,合金鋼架空地板在沖壓和焊接后都必須進行整形處理,保證了地板外形尺寸和足夠的表面平整度.選用足夠厚度的優質鋼板,經800噸壓機垂直拉伸,合金鋼架空地板一次性整體成形尤其邊角成形結構好,并以高強度發泡水泥填充,使得地板角落堅硬無比,具有特強的承載性能,并有效傳導到支撐系統上.

Alloy steel floor improvement of old technology, alloy steel overhead floor must be reshaped in stamping and welding, the surface of the floor size accurate and sufficient smoothness. Quality steel plate with enough thickness, by 800 ton vertical tensile alloy steel floor integral forming especially corner forming structure and, with high strength foam cement filling, the floor corner hard, has a strong bearing capacity, and effective transfer to the support system.

2、鋁合金架空地板

2, aluminum alloy overhead flooring

鋁合金架空地板是以綠色、環保、可回收的理念和承載能力高進行產品設計制造,發明出美麗、健康、溫馨的工作空間.

The aluminum alloy overhead floor is designed, manufactured by green, environmental protection, recyclable concept and high carrying capacity. It creates beautiful, healthy and warm workspace.

3、硫酸鈣架空地板

3, calcium sulphate overhead floor

這是一種新型的架空地板.無甲醛污染物釋放,強度高、平整、水浸泡不變形、隔音、保溫、阻燃等特點,裝飾面層根據用戶的喜好和應用可有很多選擇,可隨時輕易搬移至新處所,完全符合經濟效益.硫酸鈣地板采用未經漂白的植物作為加固材料,結合凝固成的硫酸鈣晶體,并經過脈沖壓制工序制作而成.

這是一種新型的架空地板.無甲醛污染物釋放,強度高、平整、水浸泡不變形、隔音、保溫、阻燃等特點,裝飾面層根據用戶的喜好和應用可有很多選擇,可隨時輕易搬移至新處所,完全符合經濟效益.硫酸鈣地板采用未經漂白的植物作為加固材料,結合凝固成的硫酸鈣晶體,并經過脈沖壓制工序制作而成.

架空地板安裝方法

Installation method of overhead floor

1、地面施工→放線→地面除塵→安裝柱腳→調平(機電配合插座等)→安裝面板→分項驗收.

1, ground construction and line to ground to dust, leveling (mechanical and electrical installation of column with socket, etc.), installation panel sub acceptance.

2、放線:在要鋪設架高地板的地面上,根據架高地板的排板圖和現場的軸線位置,放出架高地板的地面分格線.

2, placing the line: in the ground to be laid on a high floor, the ground division line of the high floor is released according to the platoon chart of the high floor and the position of the axis.

3、基層修補:在排板橫豎線交叉位置,即安裝底座(支撐腳座)的位置處, 為達到滿意的支撐效果,可將底層地板磨平或進行填補.

3, patching: in the horizontal and vertical line crossing row plate position, the mounting base (supporting base) position, to support a satisfying effect, can be smooth or fill the bottom floor.

4、基層清理:地面除塵,在開始安裝前,用真空吸塵器將底層地面上的所有灰塵、土和施工碎片,全部干凈.

4, grass-roots cleaning: ground dust removal, before the start of the installation, with a vacuum cleaner on the ground floor of all dust, soil and construction debris, all clean.

5、安裝支承腳:用粘接劑抹在支撐桿的底座上,并用錨固螺栓將地板支撐腳牢固的安裝在底層地板上.

5, install support foot: apply adhesive on the base of support rod, and anchor the floor support foot firmly on the floor floor with anchorage bolt.

6、調整支撐腳標高:根據地面標高情況,調整支撐腳的高度,采用擰螺紋、套等部分進行升高或降低,達到標高要求,調整好后,在螺紋(或鋁柱上)加一個調平螺母和帶有防震動移位的調平螺母.

6, adjust the supporting foot elevation: adjust the height of the supporting foot according to the height of the ground, use the screw thread, sleeve and other parts to increase or decrease to meet the requirement of elevation. After adjusting, add a leveling nut on the threaded (or aluminum column) and a leveling nut with anti vibration displacement.

7、飾面板安裝:在板面組裝四周要畫線,使其連接適配,板面與垂直面相接處的縫隙不大于3mm.用便攜式抬高器具鋪設面板,隨安隨用真空吸塵器清理(包括所安面板、支座的背正面)半塊板的切割不要在正在施工的房間內.

7, the decorative panel installed around the board to draw the assembly line, connecting the adapter plate and the vertical surface on the connecting part of the gap is not greater than 3mm. with a portable instrument panel with an elevation laying, with the use of vacuum cleaner comprehensive clean-up (including security on the front panel, support plates do not cut half) the room is under construction.

8、清理和飾面保護:鋪設后的地面,用真空吸塵器清掃,然后報驗收,經檢查合格后,用塑料布覆蓋嚴密,防止灰塵的進入和被其他施工人員破壞.

8, cleaning and finishing protection: after the laying of the ground, vacuum cleaner is used for sweeping. Then it is checked and accepted. After inspection is qualified, it is covered with plastic cloth to prevent dust from entering and destroyed by other construction personnel.